subnautica cyclops engine fragments underwater island

#Subnautica cyclops engine fragments underwater island upgrade

This will split the Cyclops into sections, localizing damage sustained. To reduce the risk of fire spreading and leaks causing massive floods, keep your bulkheads closed. The longer you wait, the more damage you sustain. It will show you where in the sub you are needed. Grab your repair tool or fire extinguisher and check the Cyclops’ hologram. If you don’t want to be a smoked snack for a leviathan, you’ll need to do some field repairs. When the Cyclops takes enough damage, the hull will become compromised and fires will start. If you get caught without decoys, you’ll need to get active. Be sure to load up the decoy tube and pack a few spares before you dive. Once launched, they will attract all aggressive fauna nearby, allowing you to slip away. Decoys can be deployed by hitting the torpedo-esque button to the right of the helm.

#Subnautica cyclops engine fragments underwater island upgrade

Upgrade modules are one way, which I’ll go over in a later section, and decoys are another. That said, there are ways to defend yourself against the terrors of the deep. Trying to go hull-to-fin with a Reaper will just make you a glorified fast-food delivery service, with you being the main course. First and foremost, you aren’t invincible. Though you might be tempted to set off immediately, there are a few things you should know to make your first voyage a safe one. Enjoy watching the construction of your home away from home. Once you’ve found your spot, deploy the Bay and commission the sub. For reference, pretty much anywhere other than the Safe Shallows will do. Unsurprisingly, the Cyclops needs a bit of wiggle room to be built, and you’ll want an open space for your first dive. Take your Mobile Vehicle Bay and deploy it in a fairly deep area. With all the busy work done, it’s time for the good part. Once you have everything, you can move on to your Mobile Vehicle Bay. Use the scanner room if you’re having trouble finding anything. This isn’t hard to make in itself, it just requires a bunch of materials. The last component is an advanced wiring kit. Lithium can be a pain to find readily, but the Mountains are your best bet. First, you’ll need to make three plasteel ingots. There are a couple of more advanced materials to obtain. Before long, you’ll have your Stalker teeth.

If you’re struggling to find Stalker teeth, lay cameras from your scanner room out for the Stalkers to bite, then follow them. You’ll need to obtain three bits of lead, one lubricant which can be fabricated from a creepvine seed cluster, and three pieces of enameled glass. These materials aren’t too hard to get, but I’ll break down each component just in case. Now that you’ve scanned the fragments and unlocked the blueprints, you have only one more chore ahead, the gathering of materials. Cyclops engine fragments can also spawn near some wrecks, though that doesn’t seem as reliable as the other methods. Other than that, you should search around the Aurora crash zone, the Mountains area, and the Crag Field. It can be a little sketchy getting inside, but once aboard, you should be safe from any nasties. If you come up short, your next best bet is to search the Aurora itself, specifically the cargo bay and Prawn bay.

Firstly, you should do as you did with the others and scan the Mushroom Forest. There are a bunch of locations in which you can find engine fragments. As with the bridge, your best bet is to build a scanner room and follow the signal. The locations for this component are fewer than the others, being found only in the Mushroom Forest and along the Sea Treader’s Path. It’s also pretty safe, though there’s something to be said for scurrying about under the nose of a Reaper Leviathan. The reason behind this specific location is that fragments for the other components spawn here too, making your search that bit easier. Your best bet for finding these fragments is to build a scanner room near the Mushroom Forest, equip a HUD chip, then set off in search of the fragments. Bridge fragments also spawn in the Mushroom Forest, in addition to the Sea Treader’s Path. The bridge is possibly the first component for which you will find fragments, as they can spawn near the Aurora crash zone.

With the HUD chip equipped, you’ll have no problem finding the fragments assuming your scanner is in range to locate them. To make things easier, you should build a scanner room and search for components. Each component will have fragments dotted about in various areas, so you’ll need to prepare for a bit of exploration. The Cyclops is no different, requiring three scans of three different components before you can build the submersible. In Subnautica, you must scan fragments of damaged bits of machinery in order to unlock blueprints.